Shop Floor Talk  

Go Back   Shop Floor Talk > Welding and Metalworking Forums > Mechanical & Electrical

JR Welding Tools
SFT Search:   
Reply
 
Thread Tools Display Modes
  #1  
Old 05-15-2017, 08:21 PM
Shade guy Shade guy is offline
Member
 
Join Date: Dec 2005
Location: arizona
Posts: 154
Default Phase Converter

I pick up a phase a matic 30 hp converter at a auction. It may be a expensive boat anchor.
I hooked it up to a 60 amp breaker and it pop it right off.
I hooked 1 line to t1 and another to t2. The t3 line I left unconnected
I took the top off and there are 12 -270uf capacitors all solder connections.
I have a capacitor checker My question is do I need disconnect them to test?

Would bad caps cause it to trip the breaker?
Thanks
Reply With Quote
  #2  
Old 05-15-2017, 09:18 PM
GWIZ's Avatar
GWIZ GWIZ is offline
SFT Historian
 
Join Date: Feb 2006
Location: USA
Posts: 6,393
Default

Can we assume this is "not" a Rotary converter?

Yes you have to disconnect each cap for testing.

Yes A shorted cap can Trip a breaker.

You may need a wiring diagram, L1, L2 is what usually connects to the Line and the T's connect to a motor.

At 30 hp just charging the caps may trip a breaker until they charge up.
__________________
*
*
The factory of the future will have only two employees, a man and a dog. The man will be there to feed the dog. The dog will be there to keep the man from touching the equipment. ~Warren G. Bennis
Reply With Quote
  #3  
Old 05-15-2017, 09:39 PM
monckywrench's Avatar
monckywrench monckywrench is offline
trust but verify
 
Join Date: Feb 2007
Location: Elsewhere
Posts: 4,183
Default

Tech support exists for good reason. Can't hurt to give 'em a call if their tech data doesn't solve the problem. It would be wise to print the tech data since websites aren't forever.

http://www.phase-a-matic.com/StaticDescription.htm
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Web Search:

All times are GMT -5. The time now is 02:34 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.