Shop Floor Talk  

Go Back   Shop Floor Talk > Welding and Metalworking Forums > Fabrication

JR Welding Tools
SFT Search:   
Reply
 
Thread Tools Display Modes
  #21  
Old 07-29-2017, 10:29 PM
Walker's Avatar
Walker Walker is offline
Standard of Excellence
 
Join Date: Aug 2004
Location: Cave Creek AZ
Posts: 3,954
Default

In my experience you are cheaper off to replace the pump.
__________________
Walker
Chief slag chipper and floor sweeper, Ironwood Artistic
Reply With Quote
  #22  
Old 07-30-2017, 11:11 AM
Grizz Grizz is offline
Member
 
Join Date: Feb 2015
Location: Bottrel Alberta
Posts: 149
Default

https://www.hy-capacity.com/index.ph...=0&SG2=0&SG3=0
these guys make replacement hydraulic parts for a lot of stuff, often the same price as rebuilt.
Reply With Quote
  #23  
Old 07-30-2017, 07:00 PM
Shade guy Shade guy is offline
Member
 
Join Date: Dec 2005
Location: arizona
Posts: 156
Default

Okay I got the pump off. The guy in Phoenix said he will give me a estimate no charge.
I will take it over there this week.
The pump is covered in 1/2 inch thick grease
I scraped most of it off.
I was wondering if a needle scaler would have helped?
Reply With Quote
  #24  
Old 08-12-2017, 11:42 AM
Shade guy Shade guy is offline
Member
 
Join Date: Dec 2005
Location: arizona
Posts: 156
Default

Update
I took the pump to a shop in phx.
He told me there is a priority valve the works the steering first which is why I have no steering
So he pulled it apart and made new seals for it.
230.00 no warranty
I am installing it and I snapped the pto mounting flange. So now I am trying to see if it is cast iron or steel
I will take some pics and post them later
Reply With Quote
  #25  
Old 08-12-2017, 02:22 PM
Ironman's Avatar
Ironman Ironman is offline
Iron Modification Investigator
 
Join Date: Feb 2008
Location: Warburg, Alberta, Canada
Posts: 11,579
Default

Quote:
Originally Posted by Shade guy View Post
Update
I am installing it and I snapped the pto mounting flange. So now I am trying to see if it is cast iron or steel
I will take some pics and post them later
Quote:
Originally Posted by Walker View Post
In my experience you are cheaper off to replace the pump.
But...but... it is cast iron. Cast steel will bend. It is weldable with Ni-rod, but you will have to dis-assemble the pump and remove the shaft seal and only heat and weld the front plate where the flange is.
I would heat it up well with a torch to cook out all the oil in the casting first.
__________________
Gerry
“After all, no one is stupid enough to prefer war to peace; in peace sons bury their fathers, and in war fathers bury their sons.”
Herodotus

Even duct tape can't fix stupid ... But it can muffle the sound. Attributed to Red Green
Reply With Quote
  #26  
Old 08-12-2017, 05:22 PM
Shade guy Shade guy is offline
Member
 
Join Date: Dec 2005
Location: arizona
Posts: 156
Default

Here are the pics. I realize I should have bumped the starter so the gears were meshed
Attached Thumbnails
Click image for larger version

Name:	IMG_1511.jpg
Views:	83
Size:	188.1 KB
ID:	140437   Click image for larger version

Name:	IMG_1512.jpg
Views:	79
Size:	199.9 KB
ID:	140438   Click image for larger version

Name:	IMG_1513.jpg
Views:	78
Size:	199.4 KB
ID:	140439  
Reply With Quote
  #27  
Old 08-12-2017, 06:36 PM
milomilo's Avatar
milomilo milomilo is offline
Auction Addict
 
Join Date: May 2010
Location: Wheatland, Wyoming
Posts: 11,845
Default

Very clean cast iron. Should weld up nicely. Keep ii hot until all the weding is done.
__________________
Chris

Loyalty to the Nation all the time, loyalty to the Government when it deserves it. Mark Twain
Reply With Quote
  #28  
Old 08-12-2017, 07:10 PM
terry lingle's Avatar
terry lingle terry lingle is offline
Something's Fishy ...
 
Join Date: Aug 2004
Location: Birch Island, BC, Canada
Posts: 4,519
Default

There is a clue hidden in this thread so far it has been a total learning experience
for a 50 year old machine at some point it is time to check the parachute

How much more can murphy have left with your name on it is the question. before starting to weld that casting make a simple fixture to keep the parts in proper relationship. if you are at all nervous ask a loto f questions before you start welding. cast is not difficult but if you get it wrong it gets messy fast.
__________________
Life beats the alternative hands down.
Reply With Quote
  #29  
Old 08-12-2017, 07:24 PM
digr's Avatar
digr digr is offline
The Real Deal
 
Join Date: Apr 2005
Location: Duluth MN
Posts: 6,931
Default

Is it possible to vee it out and bolt it on for the first bead?
__________________
Drawing by Smartdraw
Reply With Quote
  #30  
Old 08-12-2017, 07:29 PM
Ironman's Avatar
Ironman Ironman is offline
Iron Modification Investigator
 
Join Date: Feb 2008
Location: Warburg, Alberta, Canada
Posts: 11,579
Default

Quote:
Originally Posted by milomilo View Post
Very clean cast iron. Should weld up nicely. Keep ii hot until all the weding is done.
Yes. Vee out the crack from both sides til you have about 1/8" left in the contact and bolt it to a plate, and have at it. after it cools down, unbolt it and heat it and do the other side.

You can stitch weld about an inch at a time, and peen the weld as it cools, or use the other method and preheat the whole thing and then weld it up.
Good quality modern cast is very forgiving, you can weld steel to cast and do alot of stuff with it. Got a bad hole in an engine block? zipwheel a chunk out of another engine and weld it in, as an example. I welded up a 24 inch long frost crack in a White tractor engine six years back by cold stitching and it's still running.

BTW, this looks like the pump drive, not the pump, even better, you just have to deal with the gear.
__________________
Gerry
“After all, no one is stupid enough to prefer war to peace; in peace sons bury their fathers, and in war fathers bury their sons.”
Herodotus

Even duct tape can't fix stupid ... But it can muffle the sound. Attributed to Red Green
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Web Search:

All times are GMT -5. The time now is 11:54 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.